I had similar feelings but the comments below about adding an SDR to it with an M.2 slot got me looking a little closer. This has an 8-core Rockchip A72/A53 processor and 8GB of RAM. This is not an incremental improvement over the Flipper Zero, this is something else entirely. Hmmmmm...

Heh... I used Flipper Zero to clone RFID tags for all the neighbors to T5577 rings, pins, sticky pads and whatever not for our gated community.

If you are adventurous, many ski stations have low-tech cards as well, although they also tend to have human controllers once in a while.

And, finally, kids like running around with Flipper Zero opening power taps on Teslas.

I had plenty of fun reverse engineering a 433.92 MHz protocol curtain motors at my house use. Once that was done and I taught first my Flipper Zero, then a RPi with a C1101 to actuate the motors, the Flipper is sitting idly in the drawer.

I've had more success. Flipper taught me about sdr, and I was able to reverse quite a lot from my garage door pilot. Then I went on an adventure of cracking Keeloq cipher, and I haven't stopped since.

I've been happy with my Zero, cloned some friends apartment building door fobs, and using it for missing remotes for TV's and fans. But that damn dolphin is always angry with me for not using it enough.

You can also duplicate RFIDs with like a $5 scanner from Amazon (which is probably overpriced).

It's about time someone rolled out a watch that has these capabilities.

I plan on using it to create a backup password/2FA device... eventually

I have done exactly the same type and amount of stuff with my flipper zero, probably in the target demo. still, no complaints! I think the one is a cool toy that I will one day (if I’m lucky) use as the perfect solution for a problem. If I can do that just once, it’ll be worth the price for me.

Im the same way. Ive used it maybe twice to change tv channels. I mostly got it for the novelty value, probably gonna sell it.

Ive been more excited for this https://www.kickstarter.com/projects/interrupt/ interrupt-linux-powered-hacking-gadget/description. I used to have a One Plus One with Nethunter. That was a lot more useful as a hacking device. The only issue is that it required external adapters for things like wifi deauth, ir remote, e.t.c. But the ability to customize things on the fly was way better, compared to Flipper which you really can't do.

> Display connected to the microcontroller instead of the Linux SoC is an interesting choice

There's a comment at the bottom about that. Quoting the response:

> From the Linux side, it's a standard framebuffer and keyboard that applications interact with as usual. However, our connection allows the MCU to intercept them and overlay additional content — for example, if the CPU hangs, we can still show a menu on the display and respond to button presses, say for a reboot. This also lets us have a low-power mode with the display still on.

Which sounds reasonable.

Re:choice of display, I'm betting it's for power saving. If you need a better display you can use the HDMI port or DisplayPort USB-C port and just hook it right up to a monitor/TV

They added an M.2 port [1] to which you can attach a variety of modules, including SDR (eg. [2] 30 MHz - 11 GHz).

[1]: https://docs.flipper.net/one/hardware/m2-port/modules [2]: https://www.crowdsupply.com/wavelet-lab/ssdr

The flipper zero was already in a grey area because it easily enables one to do things in licensed bands and do things you’re not allowed to do in unlicensed bands. They can’t plausibly add even more functions in this area and still sell to the public. Presumably all of the interfaces they added are for users to add the functions under their own responsibility.

I wonder if that means they can sell them on amazon now.

Most likely you will have to buy the M2 adapters, for cellular, wifi, maybe zigbee and others radios, and you will switch between them, it’s also good for their profit but bad for your pocket.

More ideas:

let me build an ARP table, then give me a button to send WoL packets to host(s) of my choosing.

Let me generate p0f fingerprints on MITM'd traffic.

You do know they make proper network troubleshooting tools, right?

The 3.5mm audio jack can be used to plug in an IR emitter.

I mean, one of the very first things I would do on a such powerful device is to run a voice-controlled agent with access to all the IO the Flipper has and let the agent take over the device to do whatever I want.

I can imagine having your agent of preference writing python scripts on the fly for whatever scenario you have in mind based on your spoken desires is like... literally a dream device, at least for me.

Where does it talk about a voice assistant?

I'm as anti-TSA as the next guy, but I don't think they confiscate Flipper Zeros.

I wish more clone devices existed, with a variety of looks.

I fly with a flipper zero often. What are you talking about?

RF design is very much an art, and the difference between works and works really well without harmonics and noise is a matter of design subtleties and often expensive parts. There are decent SDR setups around $500-700 that are known to be pretty good, but you have to go out of your way to buy them from the actual design houses, because despite being “identical”, the clones are not the same. In RF, the devil is in the details.

A hackrf is less expensive than a flipper and more capable in every way, except the dolphin gifs.

The flipper's primary use is that looks like a children's toy, which makes it far more effective for demos of how bad an orgs security is to not-especially-technical stakeholders than something like a hackrf or chameleon

Not too far from the truth. The Flipper is good as a toy, but for serious RFID things you want a proxmark 3 clone with Iceman firmware ;)

It’s not a toy, it’s an AIO portable hacking budget device, it’s like comparing your pocket swiss knife to your workshop. Obviously your workshop will be better, but you are not taking it anywhere! I have for example a bladRF and limeSDR for more in depth work in radios, but I do still use flipper occasionally where bringing a laptop+sdr+antenna is hard or impossible, let alone looking like a dork doing so. For rfid, it’s great to put all your keyfobs in one place and backing them up, the condo I live in right now charges $50 if you lost your fob and needed a replacement, among many other usages. And those are some of the very basic use cases where it’s handy to have it portable.

I think in Canada they were trying to ban it!