I recently did my own hack that turned out great - it’s a drawer + desk hack. It takes some planning, but so satisfying when it works out:) https://www.reddit.com/r/ikeahacks/comments/1srj3g9/malm_m%C...

Great work, mate. Workbench looks spectacular. I happened to find a cheap relatively-stable one for my 3d printer but I really should have tried to assemble something like the one you have. In the end it worked out because the measurements land perfectly for my wife and me to have our desks with the printer, homeserver, assistant rig, and Cricut CNC in the middle. But I think she would have enjoyed the IKEA rework more. Good photos of the process too. Thanks for sharing.

At Leroy Merlin, you can order either particle boards, or normal wood boards, whether 16mm for walls, or 30mm for the table top, cut to your sizes (as long as they're rectangular), with end faces laminated as well, and all of that at a fraction of the price.

I had a broken cupboard in a rented apartment, and just built a new replacement one for €15. The bureau in the article could cost 2x..3x of this, which is still lower than overpriced IKEA furniture. (Good furniture, that isn't made of cardboard, is overpriced in IKEA.)

For functional sturdy furniture like this, if you are OK with the look, you can make the base/frame from aluminium 80/20 extrusions (the kind with t-slots and all kinds of standard brackets etc for fastening them together). Misumi has a simple CAD interface to design a complete unit, and this generates a single part number for you to purchase everything cut to length, with holes if needed, and all required accessories and fasteners to assemble it. You can easily add a wooden countertop or shelves if desired.

It's not very cheap but it's infinitely configurable (unlike Ikea hacks) and doesn't require much skill (unlike building from wood at least if you want it to look OK).

Re: the slight wobble, you should be able to find some inexpensive thin-sheet backing board at a hardware store. Use small ribbed tacking nails or glue around the edges to attach it at the back, and it should help stabilize and prevent racking.

I like the Trofast system for making stuff for storing kids toys and organizing their rooms. Honestly there is a lot to love and customize about their offerings for kids and luckily the good stuff also gets picked up by other manufacturers/suppliers, so you get access to other things that go together - furniture too, but also stickers, and other functional decor stuff. Because kids grow up fast and you may be swapping/change their stuff more often, it’s a god send to have these to help out.

Always felt like IKEA furniture was begging for customization. Been integrating smart home tech into my Kallax for months.

A non-hack I learned about yesterday. I was taking apart an IKEA dining room table. The screws and bolts were obvious, but the top would not separate from the frame.

After much parsing of the assembly manual (which took some effort to find online since they don't make this model any more), I realized that the top had slid over a knobbly dowel. Pulling horizontally popped it off.

I Sharpied the directions on the bottom before I reassembled it. We'll see if far-future me can figure out what I meant.

IKEA furniture is the ultimate open-source hardware. Just don't expect a pull request for new instructions.

Anymore I almost don't buy any IKEA stuff without intending some modification. I do woodworking as a hobby so it's nice to be able to skip all the rote stuff like building a large flat wooden surface or a square box or table legs. I can just focus on building a highly focused and functional piece of furniture for my space.