Posted by harrisonpage 3 days ago
Although it only triggers the button. So no information on whether it is opened or closed.
You see when you install MyQ, by default it opts you in for in-garage delivery. And here's the beauty, you also need a PHD to figure out how to disable the setting in Amazon. (reference: https://support.chamberlaingroup.com/s/article/myQ-and-Amazo...)
I have LG washtower thinQ enabled, and the phone app was maybe worse than the garage door opener app. But, at least, the app can be deleted, and the data endpoints are still emitting sensor data enough for home assistant to pick it up. No spam because no app. I get an email when the washer/dryer finishes, I know to plop wet clothes into the dryer, and that works great. That's a good experience. Getting phone ads for soap at 2am is not a good experience.
I have a zero tolerance policy for spam - notification permissions get taken away on the first offense, emails get marked as spam. I've had the ratgdo on eternal to-do list for a while, so this post speaks to me.
We went from:
"gee, it sure would be nice if I didn't have to get out of my car and lug this heavy door open with my bare hands"
to:
"we can use the garage doors to advertise unrelated products to the owner, and/or participate in massive bot nets to ruin other people's lives!"
A few weeks ago, I noticed my Apollo-1 Air quality sensor was seeing some strange behavior in the basement. Home Assistant showed an unexplained temperature spike and humidity drop a little before 1am.
I managed to figure out from other sensors that nothing was actually awry (no spikes in draw of nearby devices, no telltale gas signatures of the water heater kicking on, no motion or CO2 indicating human or other large animal presence). Was the board malfunctioning? Fortunately the device has an internal temperature sensor and an ambient sensor which are separate. Logging confirms the temperature spike originated on the board, probably from the WiFi chip.
But, why?
It turns out, after inspecting the signal a bit more, than the MyQ was broadcasting so loudly between the WiFi and BLE, screaming for someone to talk to it, that my air sensor was having to increase its power to still be able to communicate over all the noise. Switching to a different channel for the crappy old downstairs AP fixed it, but still, c'mon!
I'm a little wary of connecting any sort of ingress/egress to my home to the network at all, even locally, but an honest appraisal of the basement is that smashing a window is probably a much bigger threat model than hacking the door opener. Or in other words, https://xkcd.com/538/
For the garage door opener, I haven't actually gone in to see if I can completely turn off the WiFi/BLE capabilities. If I can't, I'm still only going to allow control through the relay, but I'm considering putting the receptacle itself on a controller too so it only gets power when an open/close request is received. That'll break the manual button control, though, so I'll have to also add a new button that isn't actually directly connected but instead triggers the power-up request prior to the open request... it's a good thing I like building Rube Goldberg machines.