Posted by birdboat00 2 hours ago
A fun story: Our cards had whatever industrial-spec microSD card we could find (16GB, 32GB, etc.), and we'd internally limit the disk size to whatever the platform needed. Almost every aircraft had some specific number of MB they wanted because all of their CONOPS listed it, and they didn't want to update documentation or software to put a different number there. We had a plane that could only use EXACTLY 128MB, but they were currently using 256MB cards and partitioning them to 128MB. We updated the disk size to present as 128MB so they could skip this step, and they specifically told us to put it back to 256MB because they didn't want to update the commissioning process to remove the partitioning step.
It was rewarding work, and the card we designed was cheap (~$500 each, which is literally nothing for major platforms like this) and 100% US-designed and made (with the exception of ICs manufactured in the usual places). Still, the procedural and cultural practices of these program offices made it a real struggle to get traction and deploy them widely. Government acquisition is just generally designed around funding primes for current development and then paying through the nose for sustainment later. It was hard to design something for widespread sustainment use because by the time you were done and ready for production, a bunch of parts would be obsolete. Then you'd have to rev the design over and over. We were never allowed to stockpile anything, even if it was trivially cheap, to facilitate production later.
Depending on regulations, updating the processes and associated documentation might have been more wasteful with regards to time to update, review and update the processes, time to get everyone retrained, risks of being out of compliance due to confusion, materials to print everything out, etc.
Now allowed by whom? Was it a business decision or a regulation?
Typical work would look like this:
A group would come to us and say, "We use these cards, but they wear out and we need like 200 more to keep running for 15 more years, we talked to primes about fixing this problem for us but they said the only thing they're willing to do is redesign the entire data handling infrastructure in the plane for $500M." So we'd get some tiny amount of money (like $200k) and redesign the card and make them ~20 prototypes. It'd work great, then they'd spend 3 years working on production contracts to try to get 200 built for $100k. In 3 years, some part would go obsolete, they'd come back and give us $50k to update the design and test, then start the 3 years cycle to buy 200 again. Rinse and repeat.
If they would have just given us like $30k, we already knew which parts were high risk of going obsolete, we could have just bought everything necessary to build 1000 units and dropped them in storage, but federal regulation limited what was possible. SUPER frustrating to have something that solves a problem and watch it fall apart over crappy policy.
It's sad to see this request, knowing that I was part of the team that designed a solution specifically to solve it, knowing it worked and tested it on the platform, but some part probably went obsolete and they never got enough manufactured to solve the problem permanently.
This is more of a survey to identify _potential_ suppliers of NEW CF/PC memory cards. It's not a request for bids, nor asking civilians to root around their junk drawers for cards to send off to the military.
Reading between the lines, they are likely evaluating multiple options for modernizing whatever F-22 system this is, and need to find out if going this route is even feasible.
"Otherwise please use the original title, unless it is misleading or linkbait; don't editorialize."
They'll probably want SanDisk extreme for a super sonic jet fighter though and that's pricier.
All current US military aircraft (at least up through the F-35) use CF cards to take mission planning from the laptops in the SCIF (or whatever unclass space they are using) to the aircraft.
As an aside, LCACs (among other platforms) also use these systems and cards. So this is a pretty widespread use case.
The company that I do recommend for any industrial flash is Delkin Devices (https://www.delkindevices.com/). They are based out of San Diego, CA and I bought USB 3.0 high endurance drives from them and so far the performance of those have been solid, and it's lasted me many cycles. These are whom you'd be in contact with, for bids like these.
It's worth expanding the supply chain options locally. If anyone needs this they'd have to get Micron or Sandisk to make and assemble them into other form factors. This part is what is harder than it looks, and would need to be done.
Funny thing, there were CF cards which were basically mini hard drives
They were very popular with professional photographers before that.
Circa 2000, I worked in an avionics shop that serviced (among others) MH-53J helicopter navigation and autopilot systems. The test bench for this system was about 20-feet long end-to-end and was driven by a rack-mount IBM PC with an 8086 running MS-DOS. Storage was a 5MB (or so) pre-IDE hard drive with its own controller. These were... not reliable. And since we were a training base, getting new ones was just about impossible. When the drive died, much of the test bench was useless. I wanted so bad to swap out that drive with some kind of ISA->CompactFlash adapter, but _any_ unauthorized modifications to a test bench or procedure were strictly illegal, even if you knew what you're doing.