Top
Best
New

Posted by soheilpro 10 hours ago

My monitor was cutting my download speed by 75%(blog.tymscar.com)
379 points | 194 comments
senko 7 hours ago|
This reminds me of a (completely different, but felt equally) bizzare problem with ghostty (the terminal emulator) on Linux and Steam, specifically Baldur's Gate 3.

At the start of the game after an update, BG3 compiles the (Vulkan) shaders. To avoid hammering the computer, it checks the load, including I/O pressure, and then throttles itself. It turns out that Ghostty uses io_uring, and even if it's not doing anything this somehow counts as pressure. This was made worse by the fact that I usually have a dozen or so Ghostty windows.

End result, BG3 compiles shaders using 1 core, throttled, instead of all available 20 cores. Instead of a minute or so, it'd take several hours.

(For closure: I configured ghostty to use epoll instead. Probably not optimal but works around the problem.)

pm215 3 hours ago||
Interesting to see the "io_uring vs io pressure measurement" issue come up here; it's turned up on qemu-devel recently too: https://lore.kernel.org/qemu-devel/4EF13FE7-E6F3-42E2-83F9-6...

If I am reading the thread correctly, the io_uring maintainer's position is that applications trying to use the metric that "poll via io_uring" handles differently from "poll via epoll or select" are fundamentally misguided and measuring something that doesn't make sense, so they don't want to slow down io_uring to placate those apps.

gavinsyancey 2 hours ago||
From https://lore.kernel.org/qemu-devel/962d44d3-ca7b-4cc8-b0f7-7...

> iowait is fundamentally incompatible with sane accounting in the first place, that is the problem. It really tells you nothing, and was deprecated since the days of uniprocessor systems. The problem here is not how iowait is done in the kernel, it's that people are using this metric in the first place. Which is why you just want to NOT do that, and do sane accounting on your disk drives, if you care about that kind of thing.

> Which is why I refuse to cater to any kind of iowait accounting metrics, it's just adding overhead to support a metric that is largely nonsensical in the first place. It doesn't answer any questions that an application/tier owner would want to know. Those questions might be things like "am I I/O bound?" or "is the device I'm using being slow?". I wish people would realize that, rather than continue to place value in iowait as a metric for ANYTHING, and stop trying to work around it.

It sounds more like their position is "iowait is a useless metric" and that polling with io_uring completely breaks iowait metrics but fixing it would add a minor slowdown so they refuse to do so because they don't think it's a valuable metric to begin with.

nomel 2 hours ago|||
More context: https://lwn.net/Articles/989272/
spease 2 hours ago|||
Is there a good replacement for iowait?
ajasmin 2 hours ago|||
An app can use io_uring_set_iowait to change that behavior. Since a terminal’s waiting on I/O isn’t hugging the disk but just waiting on mouse and keyboard input, that seems like the honest thing to do.
dustbunny 5 hours ago|||
Amazing. How did you figure this out?!
senko 38 minutes ago||
I asked Claude to help me debug and research it.

It looked at fossilize code (open source component used in the process), found a couple of threads online that suggested io_uring/iowait and told me first to try closing the ghostty windows and then to try to switch to epoll. This did the trick.

I have a very vague understanding of what's going on (actually better now that I've look at the links/resources from the replies in this thread!), and would probably have been able to figure it by googling in my own. But, my first hunch was that it's a problem with steam, proton, or the game, so I'd probably waste a lot of time in that direction first.

simonask 6 hours ago|||
I hate this. We have a whole operating system doing its absolute best to prioritize hardware resources. Don't be out here throttling yourself.

Especially for something like compiling shaders. It literally never happens unless the user is about to go play a game, which is going to consume most resources anyway. To the user, there's nothing more important running right now.

kevin_thibedeau 4 hours ago|||
My motherboard crashes when I peg all the cores. Presumably it can't maintain the core voltage under load. Vendors need to guard against these scenarios by being extra cautious because it's a hard problem to diagnose that they'll get blamed for.
Dylan16807 3 hours ago|||
Guarding against that seems like a bad idea, but even then just use a couple less threads than physical cores. Don't get too clever.

You in particular should probably disable a couple cores until your hardware stops being defective. Have you looked into updates and voltage droop compensation settings?

0c3ca83 3 hours ago||||
That sounds like a faulty motherboard. Return it.
Arainach 3 hours ago||
Users don't care that it's a problem with the motherboard. They have a working computer, they buy a game and it doesn't work, they blame and return the game.

Users can be unreasonable, but in this case I agree - if I reported an issue to a vendor and their response was "return your motherboard" I wouldn't work with that vendor again.

nomel 1 hour ago|||
We can't form the world around literal bad hardware. That's completely insane. The world would fall apart.

> I wouldn't work with that vendor again.

Possibly rightly so, if it's bad motherboard hardware. Could also be a bad power supply, bad ram, bad CPU, user misconfiguration, etc. It's a complex system, where everything has to NOT be bad for it to be deterministic.

There's a necessary level of competence required with self built systems, or any other task in human life that you're not paying someone else to do for you. That's fine. Go buy a MacBook or a pre built system if that threshold of competence can't be met. That's why they exist, for people that can't or don't want to bother.

podocarp 1 hour ago||
Haha, that really depends. If you look at it from the viewpoint of a failsafe, like brakes in lifts that activate without central control, backup parachutes, etc. Then it makes some sense for resource intensive software to guard against weird edge cases like this. It's just that they measured the wrong thing.
nomel 1 hour ago|||
Those have nothing to do with the required assumption of determinism in the hardware that software must enjoy.

You're examples are flawed. Those are to safely halt operation on failure. What you're suggesting with the software is to limp along pretending everything is ok.

The proper test, more in line with your others, would be to catch failure and halt operation. Since, in your case c the human isn't competent enough for that, it would maybe be a self test initiated by the operating system, then a refusal to continue when the hardware problem is identified, emulating all the periodic inspections that are part of all the proper operation of all the physical systems your mentioned.

Dylan16807 1 hour ago|||
We don't use elevator brakes or backup parachutes as an excuse to let the primary fail under normal load. Those are for emergencies.

I think the elevator analogy to this bug is that the elevator goes too fast and triggers the brakes if you input target floors more than 8 apart. You don't fix that by having the user or user software be more careful about button placement, you fix the hardware/firmware.

BenjiWiebe 3 hours ago||||
Sounds like they don't have a working computer. Computer users occasionally do things that end up pegging all cores, so I'm pretty sure that someone in that case would know their computer has some kind of issue.
0c3ca83 26 minutes ago|||
Why aren't you storing all your variables with reed solomon encoding in case you have a user with bad ram?
FuckButtons 2 hours ago||||
That seems like a you problem - undervolt your cpu.
MichaelZuo 3 hours ago|||
It’s just reality that motherboards can malfunction or degrade in peculiar ways that a manufacturer’s quick boot up checks cant always catch. No matter the reliability claims.

If they want to cater to customers who foolishly reject reality and take every claim from manufacturer’s at face value… then foolishly misaimed blaming seems expected?

But if they just roll over and swallow the foolish blaming without even challenging customers to double check, then they are also facilitating more nonsense.

MBCook 47 minutes ago||||
But why use that metric. The OS already has support for this.

Why not just re-nice the process or whatever equivalent for the threads that do the compiling? Tell the kernel what’s going on, it will handle it for you.

Don’t hack your own solution.

cowlevel 5 hours ago||||
Especially on Linux, the default throttling just doesn't work very well.
embedding-shape 6 hours ago|||
> To the user, there's nothing more important running right now.

Well, to a certain degree. I have a relatively uncommon GPU, and run games on Steam (and Linux), so literally every game does shader compilation for me. Even with a beefy CPU and beefy GPU, if the shader compilation uses more than 16 threads, my computer basically freezes until its done with it, as it's so performance intensive, kind of have to throttle things if I want to be able to use the desktop for the 10 minutes the shader compilation takes sometimes.

Edit: "Do you use Linux? That only happened to me when I was using a dram-less ssd for swap and doing IO heavy operations on the NFS mounted drive"

I do! I do have NFS drives, but not for Steam games or anything else relevant. I'm also not using swap at all. RAM seems fine during this, it's just pegging all cores to 100% usage immediately and stays there, making everything else suffer.

Aurornis 5 hours ago|||
> Even with a beefy CPU and beefy GPU, if the shader compilation uses more than 16 threads, my computer basically freezes until its done with it

Strange. This never happens to me on Windows. I only notice that the fans spin up a little because all cores are pegged.

jack_pp 5 hours ago||
i've only seen the shader compilation on linux.
braiamp 6 hours ago||||
Do you use Linux? That only happened to me when I was using a dram-less ssd for swap and doing IO heavy operations on the NFS mounted drive, since the system will use ram as a buffer (which pushes things to swap)
somat 40 minutes ago||
My steam machine is netboot diskless nfs only.(probably a mistake, but I have a nice NAS and so leaned hard into it) However, having no swap worries me. for openbsd they document how to swap to nfs. But the linux docs say not to do that. What is the best practice here? swap to an iscsi block?
Hendrikto 6 hours ago|||
> Even with a beefy CPU and beefy GPU, if the shader compilation uses more than 16 threads, my computer basically freezes

Sounds like a scheduling problem that should be adressed at the OS level.

embedding-shape 6 hours ago||
Seems a deep one if so. I've tried a bunch of alternative schedulers to try to avoid the issue, like Bore and BMQ, but seems to happen regardless. Been like this on previous computers too, fwiw, unless I turn down the concurrency for shader compilation stuff will lag heavily until it finishes.
bilegeek 5 hours ago|||
> tried a bunch of alternative schedulers

1. Have you tried enabling full preemption as well? I run Debian, and before I did that I had lots of stutters from any kind of background load thanks to dynamic preemption.

2. Even then, ZFS was causing stutters until I lowered it's priority as well (spl_taskq_thread_priority=0)

3. On non-ZFS drives, try setting your I/O scheduler to Kyber for NVME or BFQ for everything else. "mq-deadline" isn't great for interactive use on a SATA SSD, even for non-boot drives, and even NVME sometimes stutters under "none" for some people.

> I'm also not using swap at all.

4. zswap (combined with zstd compression, "min_ttl_ms=1000", and "vm.page-cluster=0") and "defer+madvise" memory compaction can help. (Something about the kernel really liking having swap on-hand.)

Steam runs shader compilations at batch policy and nice 19, so without RAM or I/O bottlnecks even gaming shouldn't be too bad (though from personal experience it still induces some stuttering). It's just most distros are tuned horribly for this. (Not to sound flippant, I understand the frustration of "just try this" and it doesn't work, but it's everything I can think of RN.)

jordanb 4 hours ago|||
You could try cpu pinning or ulimits to limit the program from using one core so there's always one free.

But it's also possible that the problem is in the kernel and the shaders are actually doing some system call that's locking up the kernel. Like maybe there's a bug in your cuda or nvidia driver that's causing the kernel to lock.

sayotte 3 hours ago||
io_uring you say… one of the most infamous subsystems for security, best reserved for stringent performance requirements. Why on earth would Ghostty default to that?
BenjiWiebe 3 hours ago||
Maybe because one of ghostty's selling points is performance.

Also if you're running untrusted code that attacks your not-very-common terminal emulator, you're probably in more danger from the "untrusted code" part. Threat model and all that stuff.

manarth 5 hours ago||
Better description: "My USB network switch was cutting my download speed".

The fact that it's a monitor is a little bit irrelevant.

xp84 4 hours ago||
Same old adapter worked perfectly if the monitor was taken out of the path. Kind of an interaction thing with both, really.
dcrazy 3 hours ago||
The twist is it would happen with any additional device in the signal path. The mere presence of a hub causes the USB control message to take slightly longer to reach the adapter—about the same amount of time it takes to receive 5 Ethernet frames at 2Gbps.

The fix is to cut the overhead by sending more than 4 frames per interrupt. Unfortunately that required buying a new adapter with a different chip.

alt227 3 hours ago|||
The fix is actually to plug it directly into the host, and not use a hub. Very common thing to need to do with cheap or older USB Hardware. Paying more money for something new when the old one works fine is pointless and wasteful.
brigade 1 hour ago|||
There are plenty of USB hubs with built-in NICs behind the hub, that can achieve full ethernet bandwidth. I even have a hub with a built-in RTL8156 and it achieves 2.4 gbps. And a separate RTL8156 plugged into a random hub also hits that.

So it certainly seems possible to have an additional device in the signal path.

eptcyka 2 hours ago|||
I was under the impression that in the Apple ecosystem, you pay for better integration. Apple’s XDR display should really be able to handle this better. Or have the drivers negotiate with the chipset better.
intrasight 4 hours ago|||
> 2026 Studio Display XDR, with everything plugged into it so switching laptops is one cable

I think I'd have accepted having two cables from the get-go. And if I observed this problem, the first diagnostic I would do is to plug the Ethernet directly into the laptop.

Fewer technical pieces in a puzzle sometimes trumps ease of use.

npteljes 1 hour ago|||
"Better" is subjective. I think monitor is a better title, because it gives misdirection, so we the readers learn the same time OP did in the story. Unreliable narrator and all that.

I understand that not everybody likes this, because it can feel like a trick, or patronizing, or lying. But in my experience, it works very well for people.

devmor 43 minutes ago||
I didn’t like it because it was a very generic and common technical occurrence that I would not be interested in reading about normally.

Now I feel as though my time was wasted by a dishonest author trying to get me to believe that their story was interesting when it was not.

In the grand scheme of things, it’s not a very big deal, but I feel quite annoyed since I was baited into expecting a fun read.

pavinjoseph 3 hours ago|||
I view anything "USB" with more than a little suspicion after my hellish journey into running RAID over USB drives.
ssl-3 14 minutes ago|||
I've got a few USB drives that are always attached that I do stuff with.

To pick a not-RAID example, I've got an old (2012-vintage) 180GB SATA SSD, from Intel, on my desk. It gets used as scratch space for big-ish file operations, where it gets hammered hard periodically, usually in bursts. It's plugged into a cheap SATA <> USB 3 adapter, and is otherwise-unadorned. It is bus-powered.

It's usually connected to the back of the PC, but it's been plugged into different USB ports (with different controller types) and also external hubs.

I don't recall what its exact status was when I starting doing that with it after pulling it out of a gently-used Thinkpad T530 about 5 years ago, but I do recall thinking that it had lots of life left.

Here's where it is today:

  - 10.6 years powered on
  - 81TB written (of 36.5TB promised); ~222% over spec
  - Zero reallocated sectors
  - One singular hardware-reported error (corrected)
  - Zero sector reallocations
And the pièce de résistance:

  - Zero reported errors according to ZFS checksums
That last one is important because in this application, ZFS automatically and continuously provides end-to-end verification, and it's been doing...perfectly fine.

The other USB storage devices here that are used 24/7 are similar in this way. It's not hellish at all. It's quite lovely.

I'm inclined to further extrapolate that it would not have better data integrity when connected directly to a SATA port on the motherboard, or in a disk shelf attached via iSCSI or SAS or some other more-stodgy thing. It's hard get results that exceed beyond perfection.

(But in this example, I'm not chasing down minute bus timing issues with multi-gig networks. That's a very different kind of discussion.)

sixothree 2 hours ago|||
You really must hate yourself to attempt that.
amelius 4 hours ago||
[flagged]
jdiff 3 hours ago|||
> So it’s the display, right? Well, I would find out: sort of yes, sort of no

Your assertion doesn't seem to align with the article itself.

disjxiwjciwjd 3 hours ago|||
Please tell me you didn’t just go the insanely childish “Apple users are dumb” route.
prmoustache 55 minutes ago||
The guy who wrote the article was literally paying for 2.5GBS internet for nearly a year without using it.

Need more proof?

fancyfredbot 6 hours ago||
Since lots of comments misunderstood the article, the extra latency from going through the monitor meant his laptop couldn't acknowledge the packets quickly enough. That led a buffer on the ethernet adapter to fill and that led it to drop packets.

A different adapter which required less frequent acknowledgement fixed the problem for him.

It is quite a nice post which gets to the bottom of incredibly opaque behaviour of USB hubs.

jayd16 4 hours ago||
The fix is that it could send more packets per ack not that it needed to happen less. If the buffer was bigger but still capped at 4 packets per ack, the full buffer drain speed would remain at ~2.
alansaber 6 hours ago||
Probably a stupid question, but why is USB behaviour so opaque?
jayd16 4 hours ago||
There's not much monitoring built into usb hubs. It's actually far less when you think about all the monitoring a network switch has.
throw0101d 6 hours ago||
Meta:

> Somehow I am one of those few very lucky people to have the opportunity of owning a 2.5 gig symmetrical line for my internet.

I'm not going to complain against more bandwidth (as a GenXer I stared my online journey at (IIRC) 9600bps (maybe lower): much celebration with V.32/V.90), but I'm curious to know how many residential use-cases can take advantage of that much bandwidth. Linux ISOs?

How many services allow that much speed on a single stream / (TCP) session? Maybe you could have five at 500 Mbps?

Certainly downloading security updates or games may be quicker, but I would think that above 500Mbps (and certainly 1 Gbps) there would be major diminishing returns. Is anyone regularly getting close to that utilization in their daily work / hobbies (and not just a momentary spike on patch Tuesday)?

Zyst 6 hours ago||
Torrents, and things like downloading games from Steam feel really good if you have a very strong connection. A lot of games can be downloaded in the time it takes to go grab a drink from the fridge. It adds some nice quality of life, there isn't as much need to keep a large downloaded set - just download when you need it, and it'll be there quickly.

I think going from something like 100 Mb download to 1 Gb is slightly overrated. You hit heavy diminishing returns. Symmetric Upload, for me, is what really changes your quality of life a lot. Uploading a youtube video suddenly isn't an event, it takes a few seconds. Want to upload an image in any chat? Done before you consciously see it uploading. Heavy commits are instant, even with a bunch of resources. It changed my behavior. I started uploading more stuff to remote servers because the cost in time got so much lower.

Guillaume86 5 hours ago||
Yup as someone on a 1000/20 link (can’t get anything better in my little village in BE), decent upload is far more useful than more download after a point (far before 1gbps).
Aurornis 5 hours ago|||
The major CDNs routinely deliver full throughput.

It’s great when experimenting with LLMs because I can quickly try new models and download from the internet almost as fast as if coming from my NAS.

Game updates are also a great use case. I don’t game often so when my friends want to play I often have to update the game. Some patches are 60GB or more. When they come down at full line speed that’s valuable time I’m getting back to spend with my friends in game.

sbrother 29 minutes ago|||
Not sure this counts as a "residential" use-case, but I have 2 gig symmetrical for my office, and it lets me rent out two GPU servers to third parties offering 750M symmetrical on each, while keeping 500M reserved for my own use even if both of those are saturated. It's awesome.
dabinat 2 hours ago|||
I think it’s less about being able to max it out and more about having background events (like backups) or other users on the network not impact your own usage.

But I run servers at home and regularly download enormous video files so I can think of plenty of ways to max out a 2.5 Gbps connection (alas my own is nowhere near as fast).

microtonal 1 hour ago||
Indeed. We have 4Gbps because it's not much more expensive than 1Gbps fiber (plus it required our ISP to upgrade our fiber connection from AON to XGS-PON, which is more future-proof).

The benefits are two-fold:

1. Background tasks don't impact your own issue (as you say).

2. Many CDNs can saturate 4 Gbps, so if you download something, the waiting time is much shorter than say 100Mbps.

Whether it's worth it all depends on the price difference.

4Gbit is kind of the sweet spot currently. 2.5Gbit equipment became quite cheap (e.g. Ubiquiti Flex Mini 2.5Gbit managed switches are often around 50 Euro), existing Cat 5e cabling still works reliably, and if you have a router with 10Gbit upstream and multiple 2.5Gbit downstream ports, none of the subnets can completely saturate the upstream bandwidth.

Also, these bandwidths rock for doing an initial backup, downloading a full backup, pulling many Docker images, large and frequent NixOS rebuilds (unstable-small, yay). Downloading GTA 6 (not me though, not a gamer).

xp84 4 hours ago|||
Do not underestimate the possibilities. I have 1.0/0.1Gb cable, and doing remote access is a complete joke. Even streaming a 1080p movie up from my house is extremely challenged.

This also locks me out of hosting my own “cloud” storage at home where it belongs - I don’t want to be out and waiting forever to get a file, so I stick to traditional cloud services for now. Slower than local storage on the LAN of course though.

A fiber isp is digging trenches soon. Cannot wait!

wpm 2 hours ago|||
Yeah upload is usually the game changer for home internet. I have symmetric gigabit and I would happily halve my download speed if it meant I could double my upload. Sending large backup .tars to cloud storage, sending data to VPCs, object storage, allowing more concurrent Plex users remotely, etc etc, 2Gbps would make so many things easier.
boston_clone 4 hours ago|||
I mean, yeah, you have a 100 Mbit/s (or 12.5 MB/s) upload rate under ideal conditions. If my math is right - haven’t had my coffee yet - that’s just 4% of the OPs bandwidth.
nunez 5 hours ago|||
2.5Gbit (or 5Gbit in my case) is INFINITELY helpful if you run k8s clusters. Container images download as quickly as moving a big file on a spinning rust hard drive even if someone else is watching TV or doing equally intensive stuff.
kakacik 3 hours ago||
Watching TV is nothing, even 4K netflix stream is around 15-20 mbit and shouldn't spawn many concurrent threads unlike say bittorrent.
wpm 2 hours ago||
I don't believe they asserted that watching TV was intensive, hence the followup "OR doing something equally intensive (as downloading a lot of container images)".
WhiteDawn 6 hours ago|||
99% of the time I don’t need it. However, when I do need it, it sure is nice to move quickly during updates or downloading sdk/assets.

Even better is those can saturate as much bandwidth as possible while the rest of the family are uninterrupted with Netflix or video calls.

npteljes 1 hour ago|||
I know I'm far from saturating my 1G symmetrical on my normal PC. Cable conditions downgraded it to 100Mbps and I didn't notice for the longest time. (Nor did I fix it since then :P)
nojs 3 hours ago|||
I also have this on paper. It’s surprising how much home hardware caps out at 1 Gbps or below. I had to replace several routers and run cables everywhere to get the full speed. Once you add on tailscale, a VPN, etc it’s a proper challenge to get it consistently working above 1Gbps.
qingcharles 2 hours ago|||
Literally everything is better with multi-gig symmetrical. I work from home and I have to pull multi-gig archives of documents for processing and that's better. Then I need to push them to web servers, and while I'm on 2Gbps I haven't managed to get an upload to anything useful higher than 600Mbps, but that was 30Mbps last month on cable, so tasks I'm waiting on are getting done 20x faster.
coryrc 3 hours ago|||
Some games are hundreds of GB of disk space and also have a terrible patching algorithm where they need to make an entire duplicate of all files to patch them, despite downloading less than a GB of patch. So you have to uninstall stuff. With fast Internet you can actually use most of your drive because you can uninstall then download a new install which only needs X space not 2X.
penagwin 5 hours ago|||
I think steam lets you get to at least 2gbps.

An interesting side effect is that bufferbloat becomes less of a problem - you’re more likely able to pull 1gbps without spiking your ping.

But to be honest unless you have a household with multiple people, it’s something you mainly notice occasionally with updates, backups, large assets, etc.

NBJack 5 hours ago|||
I doubled my measly 20 MPBps upload speed to 40 simply because of how long it was taking me to get rendered assets to someone. Having higher bandwidth than that (eventually, I hope) would be a real help in video editing.
tomxor 2 hours ago|||
> Linux ISOs

Yeah definitely Linux ISOs. It's nice to settledown in an evening, pick a new Linux ISO I haven't used yet, and veg on the sofa watching it install.

Of course unlike the netinstall images all the normies use, you have to download it up front before you start wa, uhm, installing it. But I prefer it that way so I can watch the install without being interrupted... Then again I guess at 2.5Gbit the only thing that's going to interrupt you is a crappy integrated network interface, aka Apple monitor. I don't have enough money to have that problem though.

eptcyka 2 hours ago|||
Backups are a lot faster. For some that matters. Running 2.5g locally has a lot of benefits. With a 1g network, you need just 3 people on the network for UX to degrade.
rayiner 5 hours ago|||
I have 10 gig into my house, and most services can’t saturate it. Microsoft is crap, big game downloads don’t even top out the gigabit link in the xbox. Apple gets 2-3 gig downloading xcode updates and the like.
wpm 2 hours ago|||
A lot of times downloads for games are going to be compressed/encrypted and decrypted/decompressed on the fly. It's why CPU power is actually usually the limiting factor for Steam downloads, then disk I/O capability.
nunez 5 hours ago|||
I wish I could get 10Gbit; friggin' AT&T lol.

Fetching from Google or anything on S3 can definitely fill your pipe

makeitdouble 5 hours ago|||
> Maybe you could have five at 500 Mbps?

Let's say you're on a Meet call with a dozen of people, one of them presenting their screen to explain an ongoing incident. You're following along while checking your dashboards and code on a remote server. You're of course keeping Slack sessions in the background.

I don't think you'd be saturating a 2.5G bandwidth, but perhaps about half of it ?

If your family is also using it in parallel that could get close to full use.

toast0 2 hours ago|||
If it's a call with a dozen people, media will flow through Meet's server. Some group call servers do p2p for calls with two or three people, but approximately nobody does for a dozen.

Where I work, group call participants send about ~1Mbps of video, and maybe more for screen share, could be ~2Mbps.

So you're looking at 15 Mbps inbound and 1 Mbps outbound for the call. Plus some overhead for congestion control. That's not even 1% of your 2.5gbps connection. IIRC Meet uses higher limits, so maybe double it to 30 Mbps.

You don't need gigabit for video conferencing, unless you're running the conference out of your house. Or you have 20 people all on conferences. You may want some QoS if your usage is near your bandwidth limits. Conferencing is sensitive to jitter and loss.

At my current ISP, speed is either 100M or 1G, so if you had 3+ people who conference simultaneously, 100M might well be limiting, so you would probably want 1G ... otoh, conferencing is usually bandwidth adaptive too, so it would still work, as long as everything plays nice with congestion.

Aurornis 5 hours ago||||
> Let's say you're on a Meet call with a dozen of people, one of them presenting their screen to explain an ongoing incident. You're following along while checking your dashboards and code on a remote server. You're of course keeping Slack sessions in the background.

This is closer to 1-10Mbps than 2.5Gbps. Slack is negligible bandwidth. Video conferencing is high compression, low bandwidth video.

The 1G and 2.5G lines benefit bulk file downloads.

jayd16 4 hours ago||
Maybe so but even at 10Mbps that's a lot of the 20Mbps upload you get from a residential cable line.
eska 4 hours ago||
A high quality 60fps 1080p gameplay stream is 4Mbps. That mostly still frame powerpoint presentation is completely negligible, and the 6 thumbnail sized videos you see at 30fps are too. You can run a whole office of people on that call on smaller connections.
wpm 2 hours ago||
4Mbps is pretty stingy for 1080p60, you are likely going to run into terrible artifacting on anything that isn't flat colors and static images. Twitch runs their 1080p60 at 6Mbps and a starry background will absolutely shred the image to shit.
Marsymars 1 hour ago||
"4Mbps" also isn't super meaningful without knowing what codec is being used. I'm currently watching a 10Mbps sports stream of some unknown codec and it's pretty good, but I can pretty readily pick out artifacts if I look for them.
throw0101d 5 hours ago||||
> Let's say you're on a Meet call with a dozen of people […]

I have been on Zoom and Google Meets calls with that many people on my laptop which has a Wifi connection of ≤400 Mbps (sometimes <200Mbps). You don't need >500 Mbps for online meetings.

Are you in meetings where everyone is sending 4Kp60?

silvestrov 5 hours ago||
I (for one) would definitely NOT want to see the faces of my colleagues in 4K.

lowres, please.

only 4K if the feed is from a full room with +10 people in it.

rayiner 5 hours ago|||
That wouldn’t come close to saturating 100 mbps. Screen sharing even at 4k is ridiculously efficient, maybe 4-5 mbps for what you’re describing where most of the image isn’t changing most of the time.
bloopernova 3 hours ago|||
Downloading big models is much nicer on a 1Gbit fiber line. Uploading test docker images too if you're forced into modifying them locally.
jamiek88 42 minutes ago|||
Games mostly. Getting a 40gb LMU or iracing update when logging in for a session gets old quick. Maxing my 5 gig ftth connection feels good man.

I only upgraded because my isp charged $90 for 1gig and offered 5 gig at $65 for two years so for the price of a pci nic I thought why not. It’s also nice that every device in the house can max out their capability simultaneously but that’s a rare event.

zeristor 6 hours ago|||
I do homebrew updates regularly, and quite often it can take more than an instant. On my 40Mb connection it’s slow.

Run it in background, don’t update so often perhaps; I guess I just update as tic.

seiferteric 5 hours ago|||
My cable is I think up to 2Gbps now and I regularly see game updates in steam hit like 1.4gbps. Probably it is closely located in a CDN I would assume.
locknitpicker 1 hour ago|||
> but I'm curious to know how many residential use-cases can take advantage of that much bandwidth.

I don't know what you have in mind regarding what qualifies as residential usecases. I can tell you that I use my residence for work, and as part of my work I have to hold video calls and download all kinds of packages from the internet, including pulling container images, including media asset bundles that take several GB.

This often takes place when other members of my household are doing their work or watching streaming services.

If you have a 2.5Gbps connection, you often are not looking into sustainable transfer rates but bursts. A difference between 500Mbps and 2.5Gbps is whether it takes you half a minute to pull a package or 5-10 minutes.

IshKebab 3 hours ago|||
Yeah basically nothing. I have 900 Mbps and pretty much the only things where the other end gets about 250 are Steam, Docker images, and Bittorrent. You really don't need more than 250 or at most 500 Mbps for the vast vast majority of cases.
fc417fc802 8 minutes ago||
You forgot sshfs. More generally self hosting basic services.
monster_truck 6 hours ago|||
You definitely notice it
vachina 4 hours ago||
4K HDR BRrip in 1 minute
nagisa 1 hour ago||
I recently had this same problem with a multigig copper SFP+ module. These SFP+ modules (usually) advertise 10Gbps to the NIC they're plugged in, but will negotiate lower speeds on the copper side. So when NIC tries to send to SFP+ at higher rate than whatever speed SFP+ has negotiated internally, the SFP+ module will just drop a bunch of packets and incur a significant hit in throughput.

These tend to not support sending pause frames to its SFP+ side either, so the best option I found was to set bandwidth limit on the NIC…

gh123man 6 hours ago||
I have nothing useful to add other than I feel so validated reading this. Ive been struggling with this issue on and off for over a year. With the release of Astra, it was able to finally unstick me to the point of enabling flow control which has been good enough.

I experienced this problem with a macbook and a thunderbolt dock. I had tried multiple different brands of docks and ethernet adapters, and various macbooks. One interesting thing I discovered is if I plugged a non-thunderbolt cable between the dock and the laptop, I would achieve full speed with no packet loss, so interestingly the issue doesn't occur over pure USB but only over thunderbolt.

This has got to be a bug on Apple's side right? Would be nice if they fixed it.

dcrazy 3 hours ago||
What kind of Thunderbolt cable, and what kind of USB cable? The downside of using the USB-C connector for everything is that it obscures the difference between active and passive Thunderbolt cables.
xp84 4 hours ago||
Oof. That is the kind of thing where Apple will never do anything. They implement standards, but they guarantee absolutely nothing if even so much as one cable involved isn’t Apple-branded. Using docks and Ethernet adapters? Good luck! They’ll just ask if you’ve considered buying a $5000 monitor with a $1000 stand to use as a dock instead. (And ironically, that’s what OP did and still had the problem :D)
wpm 2 hours ago||
> Using docks and Ethernet adapters? Good luck!

All the more irritating is that all this dock and dongle bullshit was popularlized by them.

frizkie 3 hours ago||
I had the same problem recently when trying to figure out high bandwidth game streaming from my desktop to my Steam deck in the living room. The beta streaming tech is “pyrowave” and it is super low latency and looks INCREDIBLE compared to traditional codecs, but as a trade off it is extremely sensitive to packet loss, and uses an appropriately large amount of bandwidth (7-800mbit at 4k120). Wired network isn’t _strictly_ a requirement but it might as well be, and the steam deck doesn’t have a physical port - but the steam deck dock does.

Anyway, the exact same situation arises, where some network condition or physical configuration (there’s a lot of hardware in between these two devices, including MoCA adapters) meant that the network adapter buffer fills up and starts dropping packets. The buffer size is configurable through some terminal command and maxing that out makes the issue disappear immediately.

umvi 2 hours ago||
Unrelated to this particular issue, but I've had subtle monitor behaviors catch me off guard as well. Usually I think of monitors as being unrelated to the underlying program running, but this is not always the case. For example I released a JavaScript programming game on steam that uses chrome (Electron) for sandboxing. This game has a tiny community but already there are a couple players doing speed running [1], and one discovered that you can complete the game many seconds faster if using a 120Hz monitor instead of 60Hz. The reason is that the JS API requestAnimationFrame [2] is tied to monitor's refresh rate (which I didn't realize) and I originally didn't do any sort of logic limiting it to 60fps (and actually I was using PixiJS tickers[3] which I didn't realize were using requestAnimationFrame under the hood).

[1] https://www.speedrun.com/Pragma_Twice

[2] https://developer.mozilla.org/en-US/docs/Web/API/Window/requ...

[3] https://pixijs.com/8.x/guides/components/ticker

bjackman 2 hours ago||
Funnily enough I recently noticed my network was slow, told Claude to investigate, it came up with "replace the DisplayPort cable on the right monitor".

Immediately 10X'd my bandwidth, turned out I was using a cheap cable that wasn't shielded like it was supposed to be, and it was running right past the WiFi antenna and causing loads of interference.

slickdork 2 hours ago|
how much back and forth was there between you and claude to troubleshoot this? you make it sound like you gave it one prompt and it found that solution, which to me seems incredibly impressive.
toast0 1 hour ago|
> Basically, when a device receives Ethernet frames it can’t keep up with, it just drops them. With flow control (it’s something your router or switch has to support), it can send the sender a “pause” frame, and the sender then buffers the data on its side, instead of the receiver (the adapter in this case) on its side.

One thing that can happen with pause frames (and why I hate them) is pause propagation. If you have a switch between your server and client and the client sends the switch a pause frame, the switch may send a pause frame to the server. If it does (and the server accepts pause frames), the server will pause sending to all destinations.

So your one slow client can disrupt all the other flows from the server. Which is totally unhinged.

More comments...